It’s safe to say that there aren’t a lot of things that are certain in our lives. But one thing is for sure, taxes, death, and getting a dent in your truck or automobile is most definitely certain and cannot be avoided. It doesn`t matter how you got your dent. What matters is to figure out how to get it out. Of course, there`s always an option to simply take your vehicle to the body shop, or mechanic to repair it, but the truth is, not everybody can afford it. So what is then at your disposal? Fortunately, there are many things that you can do to fix car dents yourself, and to help you out, we put together a list of steps that can be done to accomplish that.
Smart Ways To Remove Dents All By Yourself
Are You Still Considering A Professional?
If you do not think that you`re capable of doing this by yourself, then maybe it is the best idea to contact a professional. If you would like to set some cash aside for these purposes, then you should use a Sullivan PDR Estimator to help you calculate the cost of the damage to be repaired. Just keep in mind that if you opt for a professional, then it would be advisable to choose a local one because franchise body shops are usually very expensive.
What`s generally great about dent experts is the fact that a lot of them are mobile nowadays, meaning that they will come to your house and repair a dent in less than thirty minutes. Of course, if we`re talking about some more serious issue, then it`s going to take a bit longer.
You Can Use A Hair Dryer
Now, if you`ve decided that you can repair dents by yourself, then this is the method that you should definitely try out. Generally speaking, hair dryers are more suitable for salons than garages, however, with the proper technique you just might be able to do it right.
Once you’ve properly evaluated the damage and decided to repair it all by yourself, then these are the things that you should have:
- A clean soft cloth
- A hairdryer
- A can of compressed air
- Insulated gloves
The first thing that you’re supposed to do is to make sure that you can easily access each side of the dent. Then it’s time to use the hair dryer. You should hold it five to seven inches away from the damaged region on a medium heat setting.
After approximately two to three minutes, the panel is supposed to be elastic enough so you can proceed with the next step. Then you should pull the gloves on and slowly push the edges of the dent to check the movement.
If you notice that the panels are still stiff, then you should go back to the previous step and utilize a hair dryer for one to two minutes. While still wearing the gloves, grab the can of compressed air and shake it properly. Turn it upside down and then spray at the dent. Take the cloth and eliminate any liquid residue and that’s it. The job is done!
These Steps Are Also Worth Trying!
Employ Boiling Water
This is for sure one of the simplest ways to repair the dent. As far as the plastic bumpers are concerned, even if you try to remove the bumper, it might still be hard to push out the dent because the plastic is too stiff.
However, the good news is you can resolve this problem by boiling the water in a pot and putting it on the dent. All you have to do is to pour the water on the dent, reach below the wheel well, and then just pop out the dent.
Let`s Not Forget The Omnipotence Of A Plunger
It’s safe to say that a plunger is a powerful tool. Not only it can be used to unclog your toilet, but it can be utilized for repairing vehicles as well. Now, if a dent is too large, you can easily get rid of it by employing a plunger.
All you have to do is pour some water over this tool as well as the dent. Start pushing it up and down and repeat this several times.
Bucket & Vacuum Cleaner
Make a tiny hole in the bottom of the bucket. Put the vacuum cleaner on the hold on the bottom of the bucket and then turn on the vacuum cleaner and wait for the dent to pop out.
It`s easy to conclude that fixing car dents is actually quite simple. And what`s great about this whole process is the fact that you do not need to have any previous experience to get the job done.
